How to Clean an In Ground Swimming Pool


ND pool may take a little more difficult above ground pool clean mainly due to size and position as one. On the ground have more dirt and debris, shots of pool and may cause problems some cleaning. Hold help chemicals on the your optimal levels, prevent algae and bacteria grow, but the issue is still the first leaves and heavy dirt. The key to success is cleaning with a calendar of residence. Not only helps to keep clean the pool but you will see all growth of algae.

1. Choose a day pool, weekly cleaning will be done. Pool vacuum with a manual or automatic pool vacuum. Take a small stain brush and paint from those parts of the pool that long treated brush accessible from the major.

2. Paint the walls and the floor of the pool with the manipulated long brush and resolve hanging all dirt, debris or algae on the surface of the pool.

3. Mix the time a week in a bucket, great and pour shock treatment the swimming pool. This shock treatment will be different depending on the type of chemicals that you use every day for the pool.

4. Activate the filtration system and leave it for approximately six to eight hours, running. It can brush more from the floor and walls periodically while the filter runs if there were obvious algae. Be kept you not back down in the pool has 2-sided chemical level to normal.

5. Backwash the filter and then put a chemistry more clean filters if you saw the algae. This will be delete remaining algae or bacteria, remained in the filter and never leave their pool.

6. Enable this sitting for one night and start the vacuum pool automatic, backup, if you have one. Otherwise, when the chemical low enough for you to re-enter the pool vacuum pool.

Warning:

-That after a week shock treatments overload the pool with chemical substances that may be harmful to people’s large doses. Not everyone in the pool to allow up to chemical analysis shows that it is on an acceptable level.